- Removes up to 96% dissolved solids (TDS) from the water.
- Removes Bacteria and Viruses from water.
- Up to 10 Ltr. Per hour purified water flow.
- High quality electrical parts such as 150 GPD BNQS Pump, 24v 2.5 A SMPS,
Very superior and high quality MS Powder Coated Skid.
- 5 stage Advance purification
- Service and installation support on Toll Free no.+91 7798 67 7474.
How do Royal Oxylife Water Purifier works and how many filtration stages it have?
Let’s have a look step by step
|There are several different types of sediment cartridges. Melt Blown Polypropylene removes dirt, rust and sediment particles down to 5 microns. These cartridges are washable and reusable for particular period depends upon your water quality. 9″ inch spun / Pre-Filter candle is most popular sizes for residential drinking water applications.|
|Granular Activated Carbon Filter effectively removes Chlorine, Lead, Arsenic, Cadmium and other contaminants that may be present in the water.|
|Chlorine Taste & Odor Reduction Filter remove chlorine taste and odor and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of an efficient 5 μm nominal sediment filter.|
|R O membrane|
|Reverse Osmosis membrane is the finest purification system. At the heart of RO water purifier is a Reverse Osmosis (semi-permeable) membrane having capillaries as small as 0.0001 microns that removes dissolved impurities (salts and heavy metals) and converts hard water to sweet and purer drinking water.|
|Post Activated Carbon Filter|
|Coconut Shell Carbon Block Cartridge(s), 10 Micron removes chlorine, taste, odor and chemical contaminants. Activated carbon block filters typically have a 0.5 to 10 micron filtration capability, making it also helpful for particulate filtration, removing taste and odor from chlorine, insoluble lead reduction.|
|Purification capacity||20*(+/- 5) Litres per hour *|
|Max Duty Cycle||150 liters per Day|
|Purification Stages||1) Spun Filter 2) GAC Filter 3) CTO Filter, 4) RO Membrane 5) Post Activated Carbon|
|RO Membrane||2 Units|
|Minimum Inlet Water Pressure||0.3 kg/sq cm|
|Maximum Inlet water Pressure||2 kg/sq cm ( if input water pressure is more than 3kg/sq cm, install PRV before the Unit)|
|Input Voltage||160-300V AC ( 50Hz)|
|Operating Voltage||48V DC|
|Input water Temperature||Min 5 Celsius & Max 50 Celsius|
|Total Dissolved Solids (TDS)||Up to 1500 ppm|
|Rejection of TDS||Up to 96%|
|Dimensions (mm)||L 415 W 265 H 524|
|Net Weight||12.5 kgs.|