Royal Oxylife RO+UV+TDS purifier acts as a shield of purity against suspended solids, along with other contamination present in water. A combination of UV and RO technologies with a high capacity of 12 Litres, it has ample capacity to provide fresh and purified water for a big family.
How does Royal Oxylife Water Purifier work and how many filtration stages it has? Let’s have a look step by step
Sediment Pre-Filter There are several different types of sediment cartridges. Melt Blown Polypropylene removes dirt, rust and sediment particles down to 5 microns. These cartridges are washable and reusable for a particular period depends upon your water quality. 9″ inch spun / Pre-Filter candle is the most popular size for residential drinking water applications.
Granular Activated Carbon Filter effectively removes Chlorine, Lead, Arsenic, Cadmium and other contaminants that may be present in the water.
Chlorine Taste & Odor Reduction Filter removes chlorine taste and odor and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity of an efficient 5 m nominal sediment filter.
R O membrane
Reverse Osmosis membrane is the finest purification system. At the heart of the RO Plant, Water Purifier is a Reverse Osmosis (semi-permeable) membrane having capillaries as small as 0.0001 microns that remove dissolved impurities (salts and heavy metals) and converts hard water to sweet and purer drinking water.
Post Activated Carbon Filter
Coconut Shell Carbon Block Cartridge(s), 10 Micron removes chlorine, taste, odor and chemical contaminants. Activated carbon block filters typically have a 0.5 to 10-micron filtration capability, making it also helpful for particulate filtration, removing taste and odor from chlorine, insoluble lead reduction.
SMPS Adaptor Adaptor Output Power: 24VDC 2.5Amp/Max 3.0 Amp, Line Regulation (±): 0.5%, Load Regulation (±): 1%, Ripple & Noise (mV p-p): 250 Features: Overload Protection over Temperature Protection Short Circuit Protection Soft Start Longer service life Current Capacity: 2.5, ampere. SMPS Converts AC voltage to DC 24V.
Low-Pressure Switch If inlet water is not sufficient or at very low pressure then this switch stops the function of RO.
Once the inlet water supply starts properly LPS allow RO to function normally.
LPS avoids dry run of the booster pump.
The solenoid valve is an electromechanical actuated valve to control the flow of water. Solenoid valve works as an electronic tap, it allows water to go ahead when purifiers are on and it stops water when the purifier is off.
300 GPD Booster Pump The purpose of the reverse osmosis booster pump is to increase water pressure going into the RO unit. We use 300 GPD RO Booster Pump for providing reliable inlet pressure for efficient membrane utilization. The offered booster pump is manufactured under the direction of skilled professionals utilizing quality raw material in accordance with the set industry norms.
UV Filtration Ultra Violet Filtration contains a set of 3 different aspects i.e. UV Chamber, UV Choke and UV Tube. Ultraviolet water purification is the most effective method for disinfecting bacteria from the water. Ultra Violet rays cause immediate death for organisms and wipe out their ability to survive and reproduce. UV causes all possible destruction of bacteria and viruses.
Float Valve & Switch Micro Switch & Float Valve in the RO system used to control auto ON / OFF the system. As the water storage tank fills up with a pure water float valve turns OFF RO. When the tank is empty float valve turns purifier ON
Inlet Valve Inlet Valve is used for connecting your RO/UV water purifiers with water tap inlet connector. It is made up of the standard quality material with the help of advanced technology. It helps to on/off water supply manually.
Quick Fitting Pipe Quick fitting pipe is mostly used in advance RO water purifiers to make fittings fast easy and leak proof
Spanner In RO water purifiers the first stage of purification is a Pre-sediment filter which is recommended to clean once in fortnight/month. Spanner is used to open the Pre-Filter bowl easily.
Teflon tape is used to make Inlet valve & tap fittings leak proof.
TERMS & CONDITION
1) A customer has to inform on toll-free or mobile when they receive the product.
2) We will arrange a technician for the installation of a water purifier. Installation charges will be Rs.350/- to Rs.500/- depending on location and these charges are to be paid by customer only.
3) The technician may reach your place within 12 hr but depend on location it may take 72 hr.
4) Mobile Number of technician will be given to you by SMS only.
5) Your address and registered mobile Number will be given to the technician also.
6) It is the customer’s duty to check whether the installation is proper or not. The customer has to ask the technician to show the TDS of pure water (Keep TDS between 30 to 70 ppm). A customer has to check for leakages and all before giving the installation charges.
7) For every visit, the customer has to pay the technician.
1) One year warranty on electrical parts, except the UV Lamp. The warranty starts from the date of dispatch.
2) Filters are consumables not covered in the warranty, get blocked or choked because of water only. If water quality is good filters life will be more, If water quality is bad (More turbidity or more TDS) Filters life will be less.
3) The electrical part will be sent through courier but technicians charge is to be pay by the customer.
CANCELLATION & REFUND
- You can cancel your order anytime before it has shipped, we will refund the entire amount.
- In case you feel that the product received is not as shown on the site or as per your expectations, you must bring it to the Our notice within 8 hours of receiving the product.
- If you think, you have received the product in a bad condition or if the packaging is tampered with or damaged before delivery, please refuse to accept the package and return the package to the delivery person. Also, please email us at help.rubywatertech.com mentioning your Order ID. We will ensure that a brand new replacement is issued to you with no additional cost after receiving the product back. Please make sure that the original product tag and packing is intact when you send us the product back at your expense.
- All refunds will be processed within 10 days of receiving returned products. It will remain the customers’ responsibility to return the product in unused condition. There should not be any signs of wear and tear on either the product or the box to be eligible for a refund.